Our installations
See exactly how the interactive wall is installed on your site
A fixed version mounted on the wall, or a mobile version standing on the floor: both setups are described below, room requirement, wiring and calibration included.
Fixed setup
K-Station: mounted on the wall, projector on the ceiling
How it is laid out
- The K-Station unit is fixed to the wall, in the room chosen for daily use.
- A ceiling-mounted or shelf-mounted projector, generally an ultra short throw model, faces the wall.
- A single 220V outlet powers the whole system.
- The laser sensor is calibrated on screen once the projector is aligned.
What it needs
- 2 to 4 metres of clear, light-coloured or coloured wall.
- A clear floor area in front of the wall for players to move.
- A projector with enough throw distance for the target image width.
- About 10 minutes for a full installation, fixings included.
10 min
Permanent installation, fixings included
400 x 170
Unit dimensions in millimetres
4.2 kg
Weight of the fully equipped unit
20
Simultaneous touch points
Mobile setup
K-Mobile: floor-standing, ready in ten minutes
How it is laid out
- The K-Mobile case, with its projector already built in, is rolled into the room.
- It is positioned facing any clear wall, at the distance needed for the desired image width.
- A single power outlet is all that is required.
- Calibration is guided on screen and takes a few seconds.
What it needs
- Any clear, light-coloured or coloured wall, in any room.
- No drilling and no fixed installation.
- A flat floor for the wheeled case.
- About 10 minutes to be ready to play.
10 min
Ready to play, no tools or drilling
18 kg
80 x 49 x 20 cm case on wheels
5,000
Lumens of the built-in Epson projector
2 to 4 m
Projected image width in 16:9
Before delivery
What to prepare, and nothing more
No construction work, no heavy IT setup, no network subscription. Our team confirms the room with you before installation.
A wall, nothing more
Two to four metres of clear wall are enough. Light or coloured paint works, and no screen needs to be bought.
One power outlet
A single connection powers the whole system, projector included on the mobile version.
Guided calibration
The laser sensor is set up on screen in a few seconds, with no technical skill required.
Ready right away
Ten minutes for the mobile version, forty five minutes for the fixed version with fixings.
No Wi-Fi needed
Games run locally. The network is only used for updates, whenever you decide to run one.
Accessible to everyone
Floor-level image, played standing or seated, with no controller, suited to participants with disabilities.
Have a room in mind? Let's confirm the setup together
Send us a photo of your wall and its dimensions: we will confirm the configuration, the projector distance and the best-suited version.